The four key points of PTC in the application are reviewed

PTCIt is a resistor with a positive temperature coefficient, and its resistance value increases with the increase of temperature. Therefore,PTCIt is widely used in overcurrent protection, temperature compensation, temperature sensor and other fields. However, in usePTCSome things need to be noted to ensure its normal operation and reliability. understandPTCFeatures: In usePTCBefore, it is necessary to understand its characteristics, including the relationship between resistance value and temperature, maintenance temperature, etc. Select the appropriate one according to the application requirementsPTCModel and specification.

1. Correct connection method:PTCIt needs to be properly connected to the circuit. In general,PTCIt should be in series in the circuit to ensure that it can cut off the current in time in the case of overcurrent. At the same time, it is necessary to pay attention to the length and diameter of the connection wire to ensure that the impedance of the connection is small enough.

2. Suitable installation method:PTCIt needs to be installed in the right position to be able to dissipate heat effectively. In general,PTCIt should be installed in a position with good heat dissipation, such as heat sink or aluminum profile. At the same time, it is necessary to pay attention to the fastness and uniformity of the installation to avoid thermal resistance caused by poor contact.

3. Consider environmental factors: UsePTCIt is necessary to consider environmental factors, such as working temperature, humidity, dust, etc. In general,PTCThe operating temperature range is-40℃~125℃, the relative humidity is30%~90%. Pay attention to dust prevention measures during installation to prevent dust accumulation from affecting heat dissipation and reliability.

4. Identify and document: In usePTCLabels and documents must be recorded, including the model, specifications, installation position, and connection mode. This helps with reference and maintenance when needed.

In short, in usePTCNote the above to ensure its normal operation and reliability. Select an appropriate model and specifications based on application requirements, and connect and install the device correctly.

Yuan ShengdaFrom the establishment of the company never forget the initial "core", committed to becoming a one-stop chip supply chain service provider, Engaged in chip sales for more than ten years, promote product sales in various fields, Yuanshengda has always been adhering to the business philosophy of "not arrogant in victory and not discouraged in defeat" and "customer first", adhere to integrity management, mindful service, and focus on providing intimate and high-quality smart chip application development services for the majority of users. Welcome to inquire, you can also consult online/Leave a message and communicate directly with customer service.